Biddle Megger Repair
Megger Repair and Calibration

Megger PAT | PAT320 Portable Appliance Tester

Megger PAT tester repair services

Megger PAT320 Portable Appliance Tester Repair

Our services include Megger PAT repair for Megger PAT300, PAT320, Pat350, PAT400, PAT410, PAT420 & Megger PAT450. We repair & calibrate ALL Megger Testers.

Megger PAT Repair & Calibration Service. Megger PAT300, PAT320, PAT350, PAT400, PAT410, PAT420, PAT450

Megger PAT Repair & Calibration Service. Megger PAT300, PAT320, PAT350, PAT400, PAT410, PAT420, PAT450

The Megger PAT320 Portable Appliance Tester is available for Megger Repair Service and  Megger Calibration Service.

• Megger PAT 320-US Simple manual or automatic operation

• Megger PAT320-US 120 V 60 Hz operation

• Megger PAT320-US User-selectable PASS/FAIL limits

• Megger PAT320-US Fast test times selectable from 1s

• Megger PAT320-US Ground bond testing at 25 A, 10 A and 200 mA

• Megger PAT 320-US Differential, touch and substitute ground leakage testing

The Megger PAT320 will carry out all test requirements automatically with one button press.  Megger PAT320 is the tester if you need high productivity with a tough and easy to use instrument. If you are moving into portable appliance testing for the first time or you don’t want the complexity of database management, Megger PAT 320 is ideal for you.

 The Megger PAT320 provides outstanding productivity with the capability to test record numbers of appliances per hour. In addition to automatic testing, the ability to run each test individually is particularly well suited to service and repair organizations carrying out fault diagnostics.

  The PAT320 is a portable bench-top appliance tester for testing the safety of electrical equipment by performing a ground bond test, an insulation test, specific ground leakage tests and operational VA tests to international standards. The Megger PAT320 is a fully featured tester designed for customers who do not need the complexity of a fully configurable database of clients and results within the tester but require a complete range of functions to allow automatic or manual testing of the widest range of electrical equipment.

 Simple push-button operation makes the Megger PAT 320 fast and intuitive to use. All regulatory test requirements are supported: Class I (grounded) and Class II (non-grounded) equipment, IEC power cords and extension leads. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation (VA), indicating a pass or fail at each test. If a fail occurs, testing is stopped. When manual testing, each test is preceded by a selection screen where the test parameters are chosen, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result. The Megger PAT320 is used on the production line for final verification of electrical safety prior to general sale, or export to the EU. When exporting to Europe, it is the European importer’s responsibility to ensure imported items are safe to European standards. However, any testing performed at the destination can prove very costly for the US manufacturer when faults are found.

Testing at the manufacturing plant ensures electrical safety and provides the opportunity to fix faults and problems prior to shipping and export. For example, a poor ground connection would not normally be picked up during operational testing, and the Megger PAT320 provides an excellent means of simple safety verification. The Megger PAT320 is also suitable for use in the repair shop. Equipment can be checked on receipt in the shop before the technician powers it up, so ensuring he remains safe – the equipment could be in repair for any reason. Additionally, it can (and perhaps should) be checked prior to despatch to make sure the ground bond remains good, and the phase connections remain isolated from the chassis following repair. This maintains full integrity of the repaired item before the customer receives it back.

Please contact us for your  Megger PAT 320-US Portable Appliance Tester Repair or Megger PAT 320 Calibration. We service the full line, current and obsolete Megger PAT series. We also provide Megger Repair and Megger Calibration for All other test instruments, current and discontinued Megger test instruments.

 

 

Leave a Reply

Megger repair services:

If you are looking for James G. Biddle megger's, Biddle Tester, AVO Biddle Instruments, Biddle Instrument, AVO Biddle Megger instruments.........They are all now under one roof. AVO Int'l, James G Biddle, and Megger are all now Megger Group Limited! We repair all of these products and we also offer repair services for the handheld megohmmeters up to the largest Megger cable fault testers. Our customers span from single electricians to powerhouses such as FPL, PG&E, Duke Energy, Edison Electric, Excel Energy, Armed Forces, and variuos branches of the government. Give us a call for your next repair, calibration or new Megger meter!